Ediabas Tool32 Driver For It
Ediabas Tool32 Download The PFL
Ediabas Tool32 Install On A

Ediabas Tool32 Install On A

Only solution was to install on a XP system or like me XP VMware.

Well that all changed with BST 2.12 which works on 32 or 64bit systems.

Now NSCExpert is in English but you will find the Hot Keys do not work.

This is a bug a fellow MHH member discovered and havent really worked on trying to fix it so for the time being just click on the F key with your mouse.Not done yet with NCSExpert.

Ediabas Tool32 Download The PFL

How well download the PFL.zip and copy and replace all contents from PFL.zip to b C:NCSExpertPFL.

PFLs by searching for NCSExpert profiles in Google).

If you followed my steps correctly than your EDIABAS should already be configured to STD:OBD for use with the INPA cable.

If not you can download ediabas-konfigurator from here if it is not already in your C:EDIABASEdiabas-Konfigurator folder.

This tool allows you to easily change the ediabas.ini to your desired interface.

So if you are switching from INPA to E-Sys you could use this to switch from STD:OBD to ENET.

Ediabas Tool32 Driver For It

If not then let windows install the best suitable driver for it) Navigate to Control Panel, Device Manager, and scroll to Ports (COM LPT)look at the pic.

So we need to change this in the obd.ini file located in the c:ediabasbin folder.

But first lets make some changes to the cable.Right click on your INPA cable driver for example mine is labelled USB Serial Port and click on properties.

Once your changes are done we can proceed by clicking OK to accept the changes.

Very important to remember which USB port you connected your cable to as plugging it into a different USB port will allocate the INPA cable to a different COM port and neither tool will see the cable until the original USB port is used again or changed in device manager and obd.ini as mentioned above.

You will also want to copy the files from SP-daten- ESGDAT to C:NCSEXPERSGDAT (theyre not separated into different chassis in NCS Expert, so you just want to copy and paste everything to that directory.

Instead of writing a lengthy detail in this post, I generated the instructions thats included in link below.

Therefore, make sure your folder structure on the C drive are as follows (if youre missing a particular folder, create an empty one).